Hioki 3169-20 - Setting the RS-232 C

88
5.5 Setting on the System Setting Screen
5.5.3 Setting the RS-232C
Press the
SET UP
key to display the setting screen.
Press the
F5
(NEXT SCR) key to display the system setting
screen. (3169-20: SET UP 4/4, 3169-21: SET UP 4/5)
Move the cursor to "
BAUD RATE
."
Press the
F1
(change) key to display the selection window.
Select a baud rate using the cursor keys.
Press the
F1
(select) key.
Move the cursor to the "
TERMINATOR."
Set the end-of-line code using the function keys.
Move the cursor to "
FLOW CONTROL
."
Set the flow control using the function keys.
2400 bps, 9600 bps, 19200 bps, 38400 bps
CR+LF
CR
NONE
XON/XOFF
RTS/CTS
BOTH
NEXT
SCR
change
select