Hioki 3169-20 - Setting the Current Range

5.2 Setting on the Measurement Setting Screen (MEASUREMENT)
65
1
2
3
4
5
6
7
8
9
10
11
5.2.7 Setting the Current Range
The selectable current ranges vary depending on the clamp-on
sensor used. When the connection method is 3P4W4I, a current
range can be set for I4 that differs from that for I1 to I3.
Press the
SET UP
key to display the setting screen.
Press the
F5
(NEXT SCR) key to display the measurement setting
screen. (3169-20: SET UP 1/4, 3169-21: SET UP 1/5)
Move the cursor to "
CURRENT RANGE
" of the circuit to be
changed.
Set the current range by using the function keys as follows:
Clamp-On Sensor and Current Range
-
Changes to a smaller range.
+
Changes to a larger range.
9660/ 9695-03 5 A, 10 A, 50 A, 100 A
9661 5 A, 10 A, 50 A, 100 A, 500 A
9667-5 kA (5000 A range) 5 kA
9667-500 A (500 A range) 500 A
9669 100 A, 200 A, 1 kA
9694 0.5 A, 1 A, 5 A
9695-02 0.5 A, 1 A, 5 A, 10 A, 50 A
-
+
NEXT
SCR