Hioki 3169-20 - Setting the Integrated Power Output Rate

11.2 Setting D/A Output
161
1
2
3
4
5
6
7
8
9
10
11
11.2.2 Setting the Integrated Power Output Rate
Set the output rate when integrated power is output from the D/A
terminal. The output rate will be DC ±5 V with respect to the set full
scale of integrated power.
Select an integration output rate using the cursor keys.
Press the
SET UP
key to display the setting screen.
Press the
F5
(NEXT SCR) key to display the D/A output setting
screen. (SET UP 5/5)
Move the cursor to "
INTEG. OUTPUT RATE
."
Press the
F1
(change) key to display the selection window.
Select integration output rate using the cursor key.
Press the
F1
(select) key.
5V/1kWh,5V/5kWh (
default
),5V/10kWh,5V/50kWh,5V/100kWh,
5V/500kWh,5V/1MWh
NEXT
SCR
change
select