Hioki 3169-20 - Displaying the Voltage, Current, and Power

6.4 Measuring the Average, Maximum, and Minimum Values
101
1
2
3
4
5
6
7
8
9
10
11
6.4.1 Displaying the Voltage, Current, and Power
(Average, Maximum, and Minimum Values)
When multiple circuits are measured, use the
F2
(CIRCUIT) key
to display the data of other circuits.
Press the
F1
(SCREEN) key on the measurement screen to dis-
play the selection window.
Select "
MAIN
" using the cursor key.
Press the
F1
(select) key to display the main screen.
Every time the
F3
key is pressed, the item to be displayed is
changed as follows:
"
INST.
"
→
"
AVE.
"
→
"
MAX.
"
→
"
MIN.
"
INST.
(AVE.)
(MAX.)
(MIN.)
Changes the circuit to display
(when multiple circuits are measured).
SCREEN
select
Indicates the item
currently displayed