102
6.4 Measuring the Average, Maximum, and Minimum Values
6.4.2 Displaying the Average, Maximum, and Minimum
Power Measurements of Each Phase
When multiple circuits are measured, use the
F2
(CIRCUIT) key
to display the data of other circuits.
❖
6.2 Measuring the Power of Each Phase (Instantaneous values) (page 97)
Press the
F1
(SCREEN) key on the measurement screen to dis-
play the selection window.
Select "
POWER
" using the cursor key.
Press the
F1
(select) key to show the power display screen of
each channel.
Every time the
F3
key is pressed, the item to be displayed is
changed as follows:
"
INST.
"
→
"
AVE.
"
→
"
MAX.
"
→
"
MIN.
"
INST.
(AVE.)
(MAX.)
(MIN.)
SCREEN
select
Indicates the item
currently displayed
To Next Page
Loading...
