98
6.3 Displaying a Waveform
Display the voltage and current waveforms of a selected channel.
6.3 Displaying a Waveform
Press the
MEASURE
key to display the measurement screen.
Press the
F1
(SCREEN) key to display the selection window.
Select "
WAVEFORM
" using the cursor key.
Press the
F1
(select) key to display the waveform display screen.
SCREEN
select
• The voltage waveform in the 3P3W3M wiring system is the
phase voltage waveform referring to a virtual neutral point.
• The waveform of U3 and I3 is not displayed on the screen in
the 3P3W2M is set as the wiring method.
To Next Page
Loading...
