Hioki 3169-20 - Page 115

6.7 Measuring Harmonic
107
1
2
3
4
5
6
7
8
9
10
11
(1) Change the Channel to be Displayed.
(2) Change the Order to be Displayed.
Press the
F2
(CH) key to display the selection window.
*: When multiple circuits are set, I and P are followed by a circuit
number. (Ex., I1_1, I1_2, P_1, P_2)
Select a channel to be displayed using the cursor key.
Press the
F1
(select) key.
1P2W U1, I1, P
1P3W U1, U2, I1, I2, P
3P3W2M U1, U2, U3, I1, I2, I3, P
3P3W3M U1, U2, U3, I1, I2, I3, P
3P4W U1, U2, U3, I1, I2, I3, P
3P4W4I U1, U2, U3, I1, I2, I3, I4, P
select
CH
If the harmonic order to be displayed is set to "odd order" on the
system setting screen, "Order" is not shown on the screen above
F4
.
Every time the
F4
(ORDER) key is pressed, the order to be dis-
played is changed as follows:
"
1st to 20th
"
→
"
21st to 40th
"
→
"
Odd order only
"
ORDER