7
8.3 Automatic Output of Measurement Data to the Printer
143
1
2
3
4
5
6
8
9
10
11
Press the
F5
(NEXT SCR) key to display the save/print items set-
ting screen. Set the items to be printed out.
❖
5.4 Setting on the Save/Print Items Setting Screen (SAVE, PRINT ITEMS)
(page 79)
Press the
MEASURE
key to display the measurement screen.
Press the
START/STOP
key to start time-series measurement.
Measurement data will be printed out on the printer at every inter-
val.
NEXT
SCR
• When the interval is set to 30 seconds or less, data cannot be
output to the printer automatically.
• If many items are set to be printed, printing may not be com-
pleted within the interval. If many items are set to print, printing
may not be completed within the interval.
In this case, the interval data outputted when the buffer mem-
ory (about 28KB) of the printer is full is not printed.
To Next Page
Loading...
