Hioki 3169-20 - Using D;A Output and Printer Connection

9.2 Setting the RS-232C
149
1
2
3
4
5
6
7
8
9
10
11
Press the
F5
(NEXT SCR) key to display the system setting
screen.
Move the cursor to an RS-232C setting item to be changed. Set
the RS-232C setting items.
Setting Item Presets
BAUD RATE
2400, 9600, 19200, 38400 bps
TERMINATOR
CR+LF, CR
FLOW CONTROL OFF, XON/XOFF, RTS/CTS, Both
NEXT
SCR
• In the event of an over-run error or framing error, select a lower
baud rate.
• Do not edit the settings during communications with the 3169-
20/21.
❖
5.5.3 Setting the RS-232C (page 88)