24
2.2 Screen Names and Display Elements
2.2.3 On-Screen Indicators
Goes on when the reactive-power-meter method is
ON.
Goes on when the displayed measurement is held.
Goes on when the medium for saving data is set to
PC card. Flashes when the PC card is accessed.
Goes on when the medium for saving data is set to
internal memory. Flashes when the internal memory
is accessed.
Goes on when the PC card or internal memory is full.
Goes on when the device to be connected to the RS-
232C is set to PC.
Goes on when the device to be connected to the RS-
232C is set to printer.
Goes on when the PLL is unlocked; the synchroniza-
tion method is automatically switched over to the
fixed clock.
Goes on when the keys are locked.
Goes on when the voltage or current dynamic range
is exceeded.
Displayed when the range is exceeded.
U3* and I3* indicate that the data is obtained by calculating the 2-volt-
age, 2-current measurement results when 3P3W2M (three-phase, 3-
wire, 2-power-meter method) is selected.
❖
"Appendix" (page 195)
To Next Page
Loading...
