Hioki 3169-20 - Page 62

54
4.3 Measurement Range
Current Range
Effective measurement range
5.5 kA
6.5 kA
0.25 kA0.02 kA
5 kA
1.1 kA
Effective measurement range
1.3 kA0.05 kA0.004 kA
1 kA
550 A
Effective measurement range
650 A25 A2 A
500 A
0.001 kA 0.01 kA 0.1 kA 1 kA 10 kA
100 mA 1 A 10 A 100 A 1000 A
200 A
100 A
50 A
110 A
Effective measurement range
130 A5 A0.4 A
Effective measurement range
65 A2.5 A0.2 A
55 A
Effective measurement range
260 A10 A0.8 A
220A
100 A10 A1 A
Effective measurement range
Effective measurement range
10 A
5 A
100 mA10 mA
13 A
11 A
6.5 A
5.5 A
0.5 A0.04 A
0.02 A 0.25 A
Effective measurement range
Effective measurement range
1 A
500 mA
1.3 A
1.1 A
650 mA
550 mA
0.05 A0.004 A
2 mA 25 mA
10 A1 A100 mA10 mA1 mA
Input Current
Display range
• Dynamic range overflow warning
This warning is indicated when the input signal exceeds the
maximum or falls below the minimum (out of crest factor) dur-
ing waveform acquisition (A/D conversion). In either case,
change the range setting to that with a sufficient margin. (Indi-
cator: )
• Over range
This warning is indicated when a measurement exceeds
130%f.s. of the range. Change the range setting to that with a
sufficient margin.
(Indicator: )