Hioki 3237 - Page 78

66
_____________________________________________________________________________________________
7.3 Command Code Table
______________________________________________________________________________________________
Command Input/output data format Initial value
:CALCulate:LIMit:LOWer NRf numerical data 0
:CALCulate:LIMit:LOWer? NR1 numerical data
Command Input/output data format Initial value
:CALCulate:LIMit:STATe ON/OFF or 1/0 OFF
:CALCulate:LIMit:STATe? ON/OFF
Command Input/output data format Initial value
:CALCulate:LIMit:FAIL? HI/IN/LO/OFF/ERROR
Command Input/output data format Initial value
:SYSTem:BEEPer:STATe ON/OFF or 1/0 ON
:SYSTem:BEEPer:STATe? ON/OFF
Command Input/output data format Initial value
:SYSTem:LFRequency 50/60 60
:SYSTem:LFRequency? 50/60
Command Input/output data format Initial value
:SYSTem:KLOCk ON/OFF or 1/0 OFF
:SYSTem:KLOCk? ON/OFF
Command Input/output data format Initial value
:SYSTem:SAVe NRf numerical data
:SYSTem:LOAD NRf numerical data
Command Input/output data format Initial value
:SYSTem:FORMat NR1 numerical data 1
:SYSTem:FORMat? 1/2
Command Input/output data format Initial value
:SYSTem:HEADer ON/OFF or 1/0 OFF
:SYSTem:HEADer? ON/OFF
Set and inquiry concerning comparator lower-limit value
Set and inquiry concerning comparator execution
Inquiry concerning comparator determination
Set and inquiry concerning key operation sound
Set and inquiry concerning power-supply frequency
Set and inquiry concerning Key Lock
Panel Save and Panel Load
Set and inquiry concerning Format
Set and inquiry concerning header On/Off