81
_____________________________________________________________________________________________
7.4 Command Reference
______________________________________________________________________________________________
Syntax
[:SENSe:]VOLTage[:DC]:REFerence:STATe?
[:SENSe:]VOLTage:AC:REFerence:STATe?
[:SENSe:]CURRent:DC:REFerence:STATe?
[:SENSe:]CURRent:AC:REFerence:STATe?
[:SENSe:]RESistance:REFerence:STATe?
[:SENSe:]LPResistance:REFerence:STATe?
[:SENSe:]FRESistance:REFerence:STATe?
[:SENSe:]LPFResistance:REFerence:STATe?
[:SENSe:]CLAMp:DC:REFerence:STATe?
[:SENSe:]CLAMp:AC:REFerence:STATe?
[:SENSe:]FREQuency:REFerence:STATe?
data
Character data
ON/OFF
Function
Inquires whether the Zero-Adjust function of the specified measurement function is enabled or
disabled.
Response
syntax
Headers: ON :SENSE:LPRESISTANCE:REFERENCE:STATE data
Headers: OFF data
Example
Headers: ON
Transmission FREQ:REF:STAT?
Response :SENSE:FREQUENCY:REFERENCE:STATE OFF
Headers: OFF
Transmission FREQ:REF:STAT?
Response OFF
The Zero-Adjust function of the frequency measurement function is disabled.
Inquiry concerning Zero-Adjust execution
To Next Page
Loading...
