Hioki 3554 - Page 27

19
1.4 Names and Functions of Parts
索引
4
3
2
1
7
6
5
10
9
8
Overview
Used for selecting configuration settings and chang-
ing their values.
Used for storing displayed values to memory.
Used for setting configuration values.
Used for holding or canceling the displayed values.
Used for recalling stored measurement values.
Used for deleting stored measurement values.
Used for implementing the zero-adjust feature.
Used for setting the number of measurements used
in averaging.
Press this key once to display the current setting.
Keep the key pressed to switch settings through the
cycle shown below.
Used for switching the resistance range.
Press this key once to display the current range.
Keep the key pressed to switch settings through the
cycle shown below.
Used for switching the voltage range.
Press this key once to display the current range.
Keep the key pressed to switch settings through the
cycle shown below.
OFF
4
8
16
3.000 mΩ
30.00 mΩ
300.0 mΩ
3.000 Ω
6.000 V
60.00 V