Hioki 3554 - Page 28

1.4 Names and Functions of Parts
20
Resistance
measuremen
t
value and un
it
Temperature
measuremen
t
value and un
it
Voltage
measurement
value and unit
Data No.
Display
Displayed when the zero-adjust feature is enable.
Displayed when the auto-hold feature is enable.
Displayed when the auto-memory feature is enable.
Displayed when the comparator button is turned on.
APS
Displayed when the auto-power-save feature is enable.
Indicates the remaining battery power.
Displayed when the averaging feature is enable.
Displayed when showing or setting the date and time.
Displayed
when measurement values have been held.
MEMO No.
Displayed when the memory feature is turned on.
Ordinarily, it shows the next number to be stored.
READ No.
Displayed when recalling data from memory.
COMP No.
Displayed when setting the comparator.
Displayed when the memory number selected is already in
use.
SET
Displayed when configuring the settings for various features.
LIMIT
Displayed when setting comparator threshold values.
Displayed when the comparator feature is enable.
Displayed when the battery can be used.
Displayed when the battery is wearing out.
Displayed when the battery has worn out.