EasyManua.ls Logo

Hioki BT4560 - General Specifications

Hioki BT4560
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
115
General Specications
V accuracy
±0.0035% rdg. × 3.6 V ±5 dgt.
= ±0.000126 V ±0.00005 V
= ±0.000176 V (Rounded down to the displayed digit ±0.00017 V)
<Measurement condition 2>
Measurement range: arbitrary, Measurement speed: arbitrary, Frequency: arbitrary, Measuring object: R=arbitrary,
X=arbitrary, V=3.6 V, Instrument’s ambient temperature: 15°C
V accuracy
±0.0035% rdg. × 3.6 V ±5 dgt. + (±0.0005% rdg./°C × 3.6 V ±1 dgt./°C) × (|18°C - 15°C|)
= ±0.000176 V + (±0.000018 V/°C ±0.00001 V/°C) × 3°C
= ±0.000260 V (Rounded down to the displayed digit ±0.00026 V)
3
Temperature measurement accuracy
<Measurement condition 1>
Combination of this instrument and Z2005, Measured temperature: T=35°C, Instrument’s ambient temperature: 0°C
T accuracy
±0.5°C ±0.01°C/°C × ( |18°C - 0°C|)
= ±0.68°C (Rounded down to the displayed digit ±0.6°C)
10.6 General Specications
Operating temperature
and humidity
0°C to 40°C (32°F to 104°F), 80% RH or less (no condensation)
Storage temperature
and humidity
-10°C to 50°C (14°F to 122°F), 80% RH or less (no condensation)
Accuracy guarantee
for temperature and
humidity range
23°C±5°C (73.4°F±9°F), 80% RH or less (no condensation)
Guaranteed accuracy
period
1 year
Product warranty period 3 years
Operating environment Indoors, Pollution degree 2, altitude up to 2000 m (6562 ft.)
Rated supply voltage 100 V AC to 240 V AC (Considers ±10% voltage uctuation against rated supply voltage)
Anticipated transient overvoltage 2500 V
Rated supply frequency 50 Hz/60 Hz
Maximum rated power 80 VA
Maximum input voltage ±5 V (Between H terminal and L terminal)
Maximum voltage to
ground
0 V DC (Between H terminal and chassis)
(The L terminal is virtually grounded in the internal circuit. Thus, the voltage to ground
must not be input.)
Open-circuit terminal
voltage
50 mV or less (When not measured)
15 V or less (When measured)
Dielectric strength Between power supply terminal lump and
protective ground
1.62 kV AC, Cut-off current 10 mA
for 1 minute
Dimensions
Approx. 330 W × 80 H × 293 D mm (12.99″W × 3.15″H × 11.54″D) (excluding projections)
Mass Approx. 3.7 kg (130.5 oz.)
10
Specications

Table of Contents

Related product manuals