Hioki BT4560 - Setting the Measurement Speed

23
Setting the Measurement Speed
3.3 Setting the Measurement Speed
Set the measurement speed (FAST, MED, SLOW) in the impedance measurement and the voltage
measurement.
The slower the measurement speed is, the more accurate are the results.
Set the measurement speed of impedance measurement (Z)
By pressing
(Z SPEED) the measurement speed in the impedance measurement is
switched.
Measurement speed
switches.
Z:FAST
Z:MED
Z:SLOW
Setting Items Contents
Z:FAST When the high speed measurement is performed, set this item.
Z:MED When the normal speed measurement is performed, set this item.
Z:SLOW When the high accurate measurement is performed, set this item.
Set the measurement speed in the voltage measurement (V)
By pressing
(V SPEED) the measurement speed in the voltage measurement is switched.
Measurement speed
switches.
V:FAST
V:MED
V:SLOW
Setting Items Contents
V:FAST When the high speed measurement is performed, set this item.
V:MED When the normal speed measurement is performed, set this item.
V:SLOW When the high accurate measurement is performed, set this item.
3
Basic Measurement