Hioki BT4560 - Conditions; 6 Saving and Reading

57
6
Saving and Reading
Measurement Conditions
(Panel Saving and Loading)
The present measurement conditions are saved to the memory of the instrument (panel saving
function), and the measurement conditions are read from the memory by the key operation,
communication command transmission, and external control. (Panel loading function)
The instrument can save 126 panels of measurement conditions at a maximum. The measurement
conditions that are saved are retained even if the power is turned off, which can be read by the
panel loading function.
Items that can be saved by the panel saving
Saving
contents
• Measurement functions • Measurement range • Measurement frequency
• Measurement speed of
impedance
• Measurement speed of
voltage
• Zero adjustment setting
• Zero adjustment data • Sample delay setting • Comparator setting
• Average • Slope correction setting • Voltage limit
• Self -Calibration settings • Measurement signal zero
cross stop function
• Trigger source
Numbers
of panel
126
6 Saving and Reading Measurement Conditions
6
Saving and Reading Measurement Conditions