Hioki BT4560 - Controlling the Communication and Acquiring the Data

100
Controlling the Communication and Acquiring the Data
9.3 Controlling the Communication and Acquiring
the Data
For the description (communication message reference) of the communication commands and
queries, refer to the Communication Command Instruction Manual for the Application Software,
which is attached.
Remote state/Local state
During the communication, the instrument becomes the remote status, and [RMT] appears on the
measurement screen. Then, the operation keys except for LOCAL key are ineffective.
Press
(LOCAL). Then, the remote status is released and the key operation is possible.
When the instrument indicates the setting screen, if it becomes the remote status, the screen automatically
moves to the measurement screen.