Hioki BT4560 - Stabilizing the Measurement Values (Average Function)

42
Stabilizing the Measurement Values (Average Function)
4.4 Stabilizing the Measurement Values (Average
Function)
The arithmetic mean for the set number of measurement values will be displayed as the result. This
function can reduce the uctuation of the measurement values. This function can apply only to the
impedance measurement.
1
Press (MENU). (The setting screen appears.)
2
Select [MEAS] tab.
Selection
3
Sets the number of measured values to be used for averaging. (1 to 99)
Conrm
(or)
Cancel
Selection
Move to the next digit
(left or right)
Changing the numerical
value (up and down)