Hioki BT4560 - Limit Value

52
Setting the Upper and Lower Limit Value
4
Set the upper limit value of [R] at 7.5000 m
Ω
, and the lower limit value at 7.0000 m
Ω
.
Conrm
(or)
Cancel
Upper limit value Lower limit value
Move to the next digit
(left or right)
Changing the numerical
value (up and down)
5
Since the parameter [X] is not used, the value is not set. ([---.----] display indicates disabled.)
6
Select parameter [V].
Conrm
(or)
Cancel
Selection
7
Set the upper limit value of [V] at 5.00000 V, and the lower limit value at 4.00000 V.
Conrm
(or)
Cancel
Upper limit value Lower limit value
Move to the next digit
(left or right)
Changing the numerical
value (up and down)