53
Setting the Upper and Lower Limit Value
When [CLR] is selected and conrmed, the set value is displayed as [-.----] and is disabled.
Disabled parameters are not judged.
Conrm
(or)
Cancel
Selection
When set to 100 m
Ω
range (Minimum resolution 0.001 m
Ω
)
Rounded off to the minimum digits set.
After rounding, the upper limit will be 7.500 m
Ω
, and the lower limit will be 7.001 m
Ω
.
Settable range
R -003.0000 m
Ω
to +120.0000 m
Ω
X -120.0000 m
Ω
to +120.0000 m
Ω
Z +000.0000 m
Ω
to +120.0000 m
Ω
θ
-180.000° to +180.000°
V -5.10000 V to +5.10000 V
Common in all ranges
IMPORTANT
When the value of Hi is set smaller than the value of Lo, the value of Hi set is corrected to the
value of Lo.
5
Judging Measurement Results (Comparator Function)
To Next Page
Loading...
