Hioki BT4560 - Functions

22
Selecting the Measurement Range
3.2 Selecting the Measurement Range
Set the measurement range of impedance (3 m
Ω
, 10 m
Ω
, 100 m
Ω
).
The voltage and the temperature have a single range respectively. Thus, setting is not necessary.
Use the measurement range of impedance when the impedance measurement value exceeds the
present range or when changing the measurement accuracy.
When the functions (V, T) are selected, setting cannot be performed.
By pressing (RANGE) the measurement ranges are switched.
Measurement ranges
switches.
3 m
Ω
10 m
Ω
100 m
Ω