Hioki BT4560 - Turning the Power on or off

19
Turning the Power ON or OFF
2.3 Turning the Power ON or OFF
Turn the power on or off using the power switch on the rear.
Power OFF ( )Power ON (I)
2.4 Inspection Before Use
Before using the instrument, verify that it operates normally to ensure that no damage occurred
during storage or shipping. If you nd any damage, contact your authorized Hioki distributor or
reseller.
Verifying the instrument and the peripheral devices
Inspection items Countermeasures
Is the power cord insulation torn, or is any
metal exposed?
Do not use the instrument if damage is found, as electric
shock or short-circuit accidents could result.
Contact your authorized Hioki distributor or reseller.
Is the insulation of the measurement probe
or the connection cords torn, or is any metal
exposed?
When any damage is found, it may cause electrical shock. If
this happens, replace the measurement probe or connection
cords with ones specied by Hioki.
Is the instrument damaged? When any damage is found, it may cause electrical shock. Do
not use the instrument, and then request repair.
Verifying when turning the power on
Inspection items Countermeasures
Does the fan rotate when the power is
turned on? Are there the indications of
“BT4560” and “Version number” on the
display?
If the fan does not rotate, or if “BT4560” and “Version number”
are not displayed, the instrument may be malfunctioning.
Request repairs.
Version
BT4560
After the self-test, is the measurement
screen displayed?
If the screen does not display, the instrument may have be
malfunctioning internally. Request repairs.
2
Preparation