Hioki BT4560 - Checking the Judgment with

55
Checking the Judgment with Sound
5.4 Checking the Judgment with Sound
Select whether to use a judgment sound of the measurement results.
OFF : The buzzer does not sound.
Hi • Lo : When the judgment result is Hi • Lo, the buzzer sounds (three short sounds).
IN : When the judgment result is IN, the buzzer sounds (long sound).
ALL : When the judgment result is Hi • Lo, the buzzer sounds (three short sounds).
When the judgment result is IN, the buzzer sounds (long sound).
Setting the sound
Judgment result in
measurement
OFF Hi • Lo IN ALL
HI —

(three short sounds) —

(three short sounds)
IN — —

(long sound)

(long sound)
Lo —

(three short sounds) —

(three short sounds)
—: No buzzer sound,

(long sound): Long buzzer sound,

(three short sounds): Three short buzzer sounds.
1
Press (COMP). (The setting screen appears.)
2
Select [SYST] tab.
Selection
3
Select the buzzer sound from among [OFF], [IN], [Hi • Lo], [ALL].
Selection
Conrm
(or)
Cancel
5
Judging Measurement Results (Comparator Function)