103
Checking External Control
7.5 Checking External Control
Performing an I/O test (EXT.I/O test function)
In addition to switching output signals between ON and OFF manually, the input
signal status can be viewed on the screen.
1
Open the Settings screen.
Select [SET].
2
Select the operation mode for [EXT.I/O TEST].
Selection
Execute
Return to the
Measurement
screen.
3
Perform the EXT.I/O test.
Select the signal.
Turn ON the signal.
Turn OFF the
signal.
Return to the EXT.I/O
Settings screen.
Output signals
Allows you to perform signal operations.
(ON: Reverse display, OFF: Normal display)
Input signals
Displays the signal status. (ON: Reverse display, OFF: Normal display)
Displays LOCK in reverse video.
(ON: Normal display, OFF: Reverse display)
10
9
8
7
6
5
4
3
2
1
Appx. Ind.
To Next Page
Loading...
