Hioki ST5520-01 - Controlling The Instrument And Acquiring Data With; Remote and Local States; Commands

119
Controlling the Instrument and Acquiring Data with Commands
8.4 Controlling the Instrument and Acquiring
Data with Commands
For communications commands and query notation, refer to “8.6 Command
Reference” (p. 126). When creating programs, the communications monitor function
can be used to display commands and responses on the Measurement screen.
Remote and local states
During remote control operation, [RMT] is displayed on the Measurement screen and
all operation keys except for the MENU and STOP keys are disabled.
Cancel
the remote state.
Stop measurement.
When the MENU key is pressed, the remote state is cancelled and the key operation
is enabled.
10
9
8
7
6
5
4
3
2
1
Appx. Ind.