Hioki ST5520-01 - 2 Preparations; Connecting Power and Measurement Leads

23
2
Preparations
2.1 Connecting the Power Cord
CAUTION
To avoid electric shock and short circuits, use the voltage input cord
supplied with the instrument.
Power switch
Power inlet Outlet
1
Check that the instrument power
switch (rear panel) is OFF (
).
2
Check that the power supply
voltage is within the display range
(100 V to 240 V), and then connect
the power cord to the power inlet.
3
Plug the power cord into the outlet.
2 Preparations
10
9
8
7
6
5
4
3
2
1
Appx. Ind.