Hioki ST5520-01 - Adjusting The Backlight; Adjusting the Backlight

70
Adjusting the Backlight
5.7 Adjusting the Backlight
The backlight brightness can be adjusted to the illumination of the installation
location.
The brightness can be set to 0 for communications. Be aware that the display may
be difcult to see when the brightness is set to 0.
1
Open the Settings screen.
Select [SET].
2
Set the value for [BACKLIGHT].
The smaller the value is, the lower the brightness becomes.
Selection
[1]
[2]
[3]
Return to the
Measurement
screen.