Hioki ST5520-01 - Loading the Measurement Conditions (Panel Load Function)

77
Loading the Measurement Conditions (Panel load function)
6.2 Loading the Measurement Conditions
(Panel load function)
The measurement conditions saved by the panel save function are loaded.
1
Open the Settings screen.
Select [SET].
2
Select and load the panel number.
The panel description is displayed on the right side of the screen.
Selection
Load the panel.
Return to the
Measurement
screen.
3
Select [OK] in the conrmation screen.
Selection
OK
Cancel loading
the panel.
4
The panel name is displayed in the Measurement screen.
Measurement conditions can be loaded with the EXT.I/O control by using LOAD0
to LOAD3 or the communications commands. Refer to p. 126 for details on
commands. When the measurement conditions are changed after loading, the
panel name is no longer displayed.
10
9
8
7
6
5
4
3
2
1
Appx. Ind.