Hioki ST5520-01 - Setting the Test Voltage

34
Setting the Test Voltage
3.1 Setting the Test Voltage
Set the test voltage between 25 V and 1000 V.
As the measurement range is set based on the test voltage, a measurement range
that is not appropriate for the settings is switched automatically. The test voltage can
be set in the Measurement or the settings screen.
CAUTION
Setting at improper voltage may damage equipment to be measured.
Setting the test voltage in the Measurement screen
1
Select [VOLT].
Select [VOLT].
2
Changeandthenconrmthetestvoltagevalue.
• Change the value.
(Up/Down keys)
• Change the cursor
position. (Left and
right keys)
Conrm the value.
Cancel the change.