Hioki ST5520-01 - 3 Basic Settings; Setting Test Voltage and Range

33
3
Basic Settings
This chapter describes basic operation settings for the instrument.
“3.1 Setting the Test Voltage” ........................................................................
p. 34
“3.2 Setting the Range” .................................................................................
p. 36
“3.3 Switching the Measurement Speed (FAST/SLOW)” ..............................
p. 38
“3.4 Setting the Test Duration and Response Time”
p. 39
• “Setting how long to apply the test voltage”. ............................................
p. 39
• “Setting the response time” ......................................................................
p. 41
“3.5 Judging Measured Values (Comparator function)” .................................
p. 44
“3.6 Setting the Test Mode” ...........................................................................
p. 46
“3.7 Announcing the Judgment Results Using a Beep Sound” ....................
p. 47
3 Basic Settings
10
9
8
7
6
5
4
3
2
1
Appx. Ind.