Hioki ST5520-01 - Saving the Measurement Conditions (Panel Save Function)

76
Saving the Measurement Conditions (Panel save function)
6.1 Saving the Measurement Conditions
(Panel save function)
1
Open the Settings screen.
Select [SET].
2
Select the panel number to be saved.
The panel description is displayed on the right side of the screen.
Selection
Save the panel.
Return to the
Measurement
screen.
3
Enter and conrm the panel name.
Selection
Conrm the panel
name.
Cancel saving the
panel.
Key operations for entering a panel name
Key Operation
Moves the cursor.
Changes the characters and values.
Enters a number from 0 to 9.
Enters a letter from A to Z or an underscore character (_).
Deletes a character.