47
Announcing the Judgment Results Using a Beep Sound
3.7 Announcing the Judgment Results Using a
Beep Sound
Judgment results are announced with a beep sound under the four conditions, OFF,
PASS, FAIL, and END.
1
Open the Settings screen.
Select [SET].
2
Set the conditions for the beep sound.
Selection
[OFF]
[PASS]
[FAIL]
[END]
Return to the
Measurement
screen.
[OFF] No beep sound.
[PASS] Beeps for PASS judgment.
[FAIL] Beeps for FAIL judgment.
[END] Beeps when a measurement is completed.
10
9
8
7
6
5
4
3
2
1
Appx. Ind.
To Next Page
Loading...
