137
Command Reference
:COMParator:MODE
Sets the comparator test mode.
Syntax
:COMParator:MODE <data>
<data> CONTinue, PASSstop, FAILstop, SEQuence (text data)
Example To set the test mode to FAIL STOP
PC>
:COMParator:MODE FAILstop
:COMParator:MODE?
Queries the comparator test mode.
The test mode is returned in text data (<data>).
Syntax
:COMParator:MODE?
Response
:COMPARATOR:MODE <data>
or simply
<data>
<data> CONTINUE/PASSSTOP/FAILSTOP/SEQUENCE (text data)
Example To query the comparator test mode (when the test mode is FAIL STOP)
PC>
:COMParator:MODE?
ST5520>
:COMPARATOR:MODE FAILSTOP
(when the
:HEADer
command is ON)
ST5520>
FAILSTOP
(when the
:HEADer
command is OFF)
:COMParator:BEEPer
Sets the beep sound at the time of comparator judgment and at the end of the timed duration.
Syntax
:COMParator:BEEPer <data>
<data> PASS/FAIL/OFF/END (text data)
Example To set to beep at FAIL judgment
PC>
:COMParator:BEEPer FAIL
:COMParator:BEEPer?
Queries the beep sound setting at the time of comparator judgment and at the end of the timed
duration.
The beep sound setting is returned in text data (<data>).
Syntax
:COMParator:BEEPer?
Response
:COMPARATOR:BEEPER <data>
or simply
<data>
<data> PASS/FAIL/OFF/END (text data)
Example To query the beep sound setting at the time of judgment (when the beeper
sounds at FAIL judgment)
PC>
:COMParator:BEEPer?
ST5520>
:COMPARATOR:BEEPER FAIL
(when the
:HEADer
command is ON)
ST5520>
FAIL
(when the
:HEADer
command is OFF)
10
9
8
7
6
5
4
3
2
1
Appx. Ind.
To Next Page
Loading...
