Hioki ST5520-01 - Error Display and Solutions

163
Key combination Initialization (Turn on the power while pressing the MENU + Up keys.)
Interlock cancellation (Turn on the power while pressing the MENU +
Down keys.)
Enabled/disabled input list
The following table shows the status (enabled/disabled) of the keys, switched probe, EXT.I/O,
and RS command input. “

” indicates enabled and “-” indicates disabled. Some combinations of
status can occur simultaneously, however, the disabled status has priority.
Input
Status
Key input
Switched
Probe 9299
START STOP UNLOCK/LOCAL Others START/STOP
The EXT.I/O STOP signal
is LOW.
−
  
−
The EXT.I/O INTERLOCK
signal is LOW.
−

− − −
Remote −


(Resets the remote.)
−

Key lock
 

(Resets the lock.)
−

TEST −

− −

Input
Status
EXT.I/O RS command
START STOP Others
*1
:START :STOP
Others
The EXT.I/O STOP signal
is LOW. −

−
Execution
error
 
The EXT.I/O INTERLOCK
signal is LOW.
−
 
−
 
Remote
     
Key lock
     
TEST −
 
*2
−
Execution
error
 
*3
*1
: The interlock is enabled during panel load operation.
*2
: The test is stopped when panel is loaded during the test.
*3
: Some commands stop a test.
10
9
8
7
6
5
4
3
2
1
Appx. Ind.