13
Usage Notes
CAUTION
• When connecting to the measurement object or not using the instrument,
be sure to unplug the power cord from the instrument and completely
disconnect it from the power supply for safety.
• Do not connect a wrong power voltage. Doing so may damage the
internal circuit.
IMPORTANT
• Turn off the power before disconnecting the power cord.
• To suppress noise, it is necessary to switch the power frequency setting on the
instrument. Set the frequency to the frequency of the commercial power supply to
be used before starting the measurement.
In the manual setting, a measured value does not stabilize unless the power
frequency setting is switched properly.
Precautions during shipment
Observe the following during shipment.
Hioki cannot be responsible for damage that occurs during shipment.
CAUTION
When shipping the instrument, use the packaging materials used when the
instrument is delivered.
10
9
8
7
6
5
4
3
2
1
Appx. Ind.
To Next Page
Loading...
