Hioki ST5520-01 - Page 50

42
Setting the Test Duration and Response Time
Setting to MANUAL
1
Open the Settings screen.
Select [SET].
2
Set [DELAY] to [MANUAL].
Selection
[MANUAL]
Return to the
Measurement
screen.
3
Set [DELAY] to edit mode.
Selection
Edit the value.
Return to the
Measurement
screen.
4
Set the response time.
• Change the value.
(Up/Down keys)
• Change the cursor
position. (Left and
right keys)
Conrm the value.
Cancel the change.