QoS/Priority
102
6.5
Queue Management
RM Web L3P
Release
4.1
03/08
6.5 Queue Management
For every traffic class, the Queue Management table allows you to
X enable Strict Priority (= disable Weighted Fair Queuing),
X disable Strict Priority (= enable Weighted Fair Queuing),
X enter a value for the minimum bandwidth,
X enter a value for the maximum bandwidth.
Note: Disabling Strict Priority for a traffic class also disables Strict Priority for
all traffic classes with a lower priority level. Enabling Strict Priority for a traffic
class also enables Strict Priority for all traffic classes with a higher priority
level.
Figure 39: Queue Management table