Security
40
3.1
Password / SNMP
RM Web L3P
Release
4.1
03/08
3.1 Password / SNMP
This dialog gives you the option of changing the read and read/write pass-
words for access to the device via the Web-based interface/CLI/SNMP.
Please note that passwords are case-sensitive. For security reasons, the
read password and the read/write password must not be identical.
The Web-based interface and the user interface communicate via SNMP
version 3.
Select "Modify read-only password" to enter the read password.
Enter the new read password in the "New password" line and repeat your
entry in the "Please retype" line.
Select "Modify read-write password" to enter the read/write password.
Enter the read/write password and repeat your entry.
"Data encryption" encrypts the data of the Web-based management that
is transferred between your PC and the device with SNMP V3. You can
set the "Data encryption" differently for access with a read password and
access with a read/write password.
Figure 15: Password dialog
To Next Page
Loading...
