Routing
RM Web L3P
Release
4.1
03/08
7.2
Configuring Router Interfaces
109
Deleting a router interface
Select a row and click "Delete". By doing this,
– you delete the row if it is a VLAN-based entry, or
– you reset the values in the row if it is a port-based entry.
Note: The prerequisite for resetting the values is the prior deletion of
other entries (if present) in the "Secondary Addresses" dialog.
7.2.2 Configuring secondary addresses
When you want to use the multinetting function, this dialog enables you to as-
sign secondary IP addresses to a router interface.
Use the left mouse-button to select a row that contains the port ID in the
first column. Right-click on the selected row and select “Add IP address-
es” to add another IP address/network mask to the router interface.
To delete or edit another existing address, select the appropriate row,
right-click on this row, and select "Edit" or "Delete".
Note: Prerequisite for deletion is that routing has been switched on for
this router interface in the "Router Interfaces" dialog.