Switching
70
5.1
Switching Global
RM Web L3P
Release
4.1
03/08
5.1 Switching Global
This dialog is used to
X display the MAC address of the device
X enter the aging time for all dynamic entries in the range from 10 to 630 s
(unit: 1 s; default setting: 30 s).
In connection with the router redundancy (see MACH 3000), select a time
greater than/equal to 30 seconds.
X enable/disable the flow control
X enable/disable the address learning
X set the maximum packet size (frame size).
Select "1552" if you want the device to transmit packets with double tag-
ging. You can thus operate the device in networks with MPLS Switches/
routers, for example.
Figure 27: Switching Global
To Next Page
Loading...
Need help?
General
