Redundancy
RM Web L3P
Release
4.1
03/08
8.1
Link aggregation
131
Note: For redundancy security reasons, a combination of network/ring
coupling and link aggregation is not possible.
8.1.2 HIPER ring and link aggregation
For PowerMICE and MACH 4000: To increase the security on particularly
critical connections, you can combine the HIPER-Ring Version 1 redundancy
functions (see on page 132 „HIPER-Ring“) and Link aggregation.
Note: If you want to use link aggregation connections in HIPER-Ring
Version 1, you enter the index of the desired link aggregation entry for the
module and the port. Make sure that the respective HIPER-Ring port is
participating in the selected link aggregation.