Security
46
3.3
Telnet/Web/SSH Access
RM Web L3P
Release
4.1
03/08
Note: The Command Line Interface (out-of-band) and the Security:Tel-
net/Web access dialog in the Web-based interface allow you to reactivate
the Telnet server.
3.3.2 Description of Web access
The Web server of the device allows you to configure the device by using the
Web-based interface. You can deactivate the Web server to prevent Web
access to the device.
On delivery, the server is activated.
After the Web server has been switched off, it is no longer possible to login
via a Web browser. The login in the open browser window remains active.
Note: The Command Line Interface and this dialog allow you to reactivate
the Telnet server.
3.3.3 Description of SSH access
The SSH server of the device allows you to configure the device by using the
Command Line Interface (in-band). You can deactivate the SSH server to
prevent SSH access to the device.
On delivery, the server is deactivated.
After the SSH server has been deactivated, you will no longer be able to
access the device via a new SSH connection. If an SSH connection already
exists, it is kept.
To Next Page
Loading...
Need help?
General
