Hirschmann Power MICE - Port access control

Switching
84
5.5 VLAN
RM Web L3P
Release 4.1 03/08
5.5.1 Setting up the VLAN
You will find an example configuration in the Basic Configuration user man-
ual.
To set up VLANs, you first create the desired VLANs in the VLAN static table:
Figure 31: VLAN Static table
 After clicking "Create entry", you enter the corresponding VLAN ID. A new
row appears in the table.
 Enter the name of your choice for this VLAN.
 Define the membership of the ports you require.
- Not a member of the VLAN.
M Member of the VLAN; send data packets with tag.
F Not a member of the VLAN, not even dynamically via GVRP.
U Member of the VLAN; send data packets without tag.