Advanced
212
10.3
Industry Protocols
RM Web L3P
Release
4.1
03/08
10.3.1PROFINET IO
To integrate this into a control system,
activate the function in the "ProfinetIO" frame
click on "Download GSDML File" to load the GSDML file onto your PC
in the Basic Settings:Network dialog, check whether Local is
selected in the "Mode" frame (see on page 22 „Network“),
in the Switching:VLAN:Global dialog, check whether "VLAN 0
Transparent Mode" is selected (see „Setting up the VLAN“ on page 84),
configure the alarm settings and the threshold values for the alarms you
want to monitor (see the „Device Status“ dialog on page 193,
configure the SPS as described in the "Industry Protocols" user manual
10.3.2EtherNet/IP
To integrate this into a control system,
activate the function in the "EtherNet/IP" frame
click on "Download EDS File" to load the EDS file onto your PC
in the Switching: Multicasts dialog, check whether IGMP Snooping
is activated (see on page 75 „Multicasts“),
configure the SPS as described in the "Industry Protocols" user manual
To Next Page
Loading...
Need help?
General
