Routing
106
7.1
Global
RM Web L3P
Release
4.1
03/08
7.1 Global
With this dialog you can:
X Switch on the routing function globally.
X Display the default TTL (Time To Live).
TTL is a value in an IP data packet. Every router that passes on a data
packet reduces this value by 1. The router that receives a data packet with
the value 1 rejects the data packet and reports it to the sender, whose IP
source address is contained in the IP packet.
If the Switch sends its own data packet, then it sets the TTL value to the
default value displayed.
To Next Page
Loading...
