Redundancy
RM Web L3P
Release
4.1
03/08
8.5
VRRP/HiVRRP
177
Note: You activate the preempt mode so that, after the decrementation of
the VRRP priority of the master via the tracking function, the backup
router can take over the master role.
Click on “Finished” to transfer the VRRP router interface into the
VRRP router interface table
or
Click on “Continue” if you want to enter additional IP addresses under
“Associated IP Addresses” (Multinetting).
Click on “Finished” to transfer the VRRP router interface into the
VRRP router interface table.
Configuring the VRRP router instance
In the Redundancy:VRRP/HiVRRP:Configuration dialog,
double-click a cell of the table and edit the entry or
right-click a cell and select a value.
As an alternative to editing directly in the table, you can mark a row in
the table and use the Wizard to edit it.
Deleting a VRRP router instance
In the Redundancy:VRRP/HiVRRP:Configuration dialog, select
a row and click “Delete”. You thus delete the row.
8.5.2 HiVRRP domains
A HiVRRP instance is a router instance configured as HiVRRP with functions
that HiVRRP contains. In a HiVRRP domain you combine multiple HiVRRP
instances of a router into one administrative unit. You nominate one HiVRRP
instance as the supervisor of the HiVRRP domain. This supervisor regulates
the behavior of all HiVRRP instances in its domain.
The router supports up to 8 domains.
To Next Page
Loading...
Need help?
General
