Security
RM Web L3P
Release
4.1
03/08
3.1
Password / SNMP
41
Important: If you do not know a password with read/write access, you will
not have write access to the device!
Note: After changing the password for write access, restart the Web
interface in order to access the device.
Note: For security reasons, the passwords are not displayed. Make a note of
every change! You cannot access the device without a valid password!
Note: For security reasons, SNMP version 3 encrypts the password. With the
"SNMPv1" or "SNMPv2" setting in the Security:SNMPv1/v2 access dialog,
the password becomes readable again.
Note: In SNMP version 3, use between 5 and 32 characters for the pass-
word, because many applications do not accept shorter passwords.
Access via a Web browser can be blocked in the dialog „Telnet/Web/SSH Ac-
cess“ on page 45.
Access at IP address level is restricted in the dialog „SNMPv1/v2 Access Set-
ting“ on page 42.
To Next Page
Loading...
