Redundancy
134
8.2
HIPER-Ring
RM Web L3P
Release
4.1
03/08
Note: When using 100 Mbit/s with twisted pair cables, avoid the combination
of autonegotiation “off” and cable crossing “automatic”. Use crossover cables
with 100 Mbit/s.
Display in “Operation” field:
Active: this port is switched on and has a link.
Inactive: this port is switched off or has no link.
At exactly one device, you switch the redundancy manager on at the ends
of the line.
Select the desired value in the “Ring Recovery” frame for the device for
which you have activated the redundancy manager.
Note: Settings in the “Ring Recovery” frame are ineffective for devices that
are not the redundancy manager.
Note: If selecting the smaller value for the ring recovery does provide the ring
stability neccesary to meet the requirements of your network, you select
500 ms.
To Next Page
Loading...
Need help?
General
